Wireless

authentication key-management wpa version 2

Make the SSID a WPA2 network: only stations that present its pre-shared key may associate.

Works on: Access pointMode: ssid

Example

AP-Lobby(config)# dot11 ssid GUEST-WIFI
AP-Lobby(config-ssid)# authentication key-management wpa version 2
AP-Lobby(config-ssid)# wpa-psk ascii LobbyGuest2026
Watch out

Key management with no key locks everyone out: no station can associate until 'wpa-psk ascii <key>' is set.

Run this command live

Don't just read it — type authentication key-management wpa version 2 in a real network simulator in your browser and watch it take effect. No install, no account needed to start.

Open the lab

Frequently asked

What does the "authentication key-management wpa version 2" command do?

Make the SSID a WPA2 network: only stations that present its pre-shared key may associate.

What's the common gotcha with "authentication key-management wpa version 2"?

Key management with no key locks everyone out: no station can associate until 'wpa-psk ascii <key>' is set.

Example of "authentication key-management wpa version 2"

AP-Lobby(config)# dot11 ssid GUEST-WIFI AP-Lobby(config-ssid)# authentication key-management wpa version 2 AP-Lobby(config-ssid)# wpa-psk ascii LobbyGuest2026

More Wireless commands

← Back to the full command reference

authentication key-management wpa version 2 — network CLI command reference · NetForge-AI